Self Installation Process

6-Step Guide to Installing Your Watch Protection Film By Your Self

Step 1: Prepare the Application Solution

• Fill a small container with clean water and add a single drop of mild liquid soap.
• Mix gently to create a diluted solution—this helps with smooth application and prevents air bubbles.

Step 2: Dip the Film

• Carefully peel off the protective backing from the film.
• Lightly dip the adhesive side of the film into the prepared soapy water.
• Gently place the film onto the watch, ensuring proper alignment before pressing it down.

Step 3: Apply the Film (Section by Section)

• Start with the Case: Gently peel off the backing of the case film. Align it carefully with the edges of the watch case.
• Repeat for other parts of the watch, such as the bezel, bracelet, and crown, one section at a time.

Step 4: Smooth film bubbles and Edges

• Smooth Out Bubbles: Use a soft tool (like the included applicator or a plastic card wrapped in a microfiber cloth) to press the film down evenly. Start from the center and work outward to remove air bubbles.
• Repeat for other parts of the watch, such as the bezel, bracelet, and crown, one section at a time.

Step 5: Final Adjustments

• Inspect all areas to ensure the film is perfectly aligned and adheres without gaps or overhangs.
• Remove any remaining bubbles by pressing them out toward the edges using the applicator.
• Allow the film to set for a few hours in a dust-free environment to ensure a secure bond.

Step 6: Enjoy Your Protected Watch

• Wipe the watch gently with a microfiber cloth to remove fingerprints from the installation process.
• Your Rolex is now protected from scratches, scuffs, and daily wear while maintaining its luxurious look.
  

Tips for a Perfect Installation

1. Take your time – rushing can lead to misalignment or bubbles.
2. Keep extra film pieces handy in case of mistakes.
3. If you encounter issues, such as peeling edges, gently peal sticker off and reapply the sticker into the solution. Repeat as necessary